Convert square metre/second to stokes

Vice Versa: stokes to square metre/second

Square Metre/Second

The square metre per second (m²/s) is the SI unit of kinematic viscosity, defined as dynamic viscosity divided by density. It measures how readily a fluid flows under gravity. Water has a kinematic viscosity of approximately 10⁻⁶ m²/s (1 cSt) at 20°C.

Stokes

The stokes (St) is the CGS unit of kinematic viscosity, named after Sir George Gabriel Stokes. One stokes equals one square centimetre per second (1 cm²/s = 10⁻⁴ m²/s). Water at 20°C has a kinematic viscosity of about 0.01 St (1 centistoke).

Square Metre/Second to Stokes conversion table

Square Metre/Second	Stokes	Stokes	Square Metre/Second
1	10000	1	0.0001
2	20000	2	0.0002
3	30000	3	0.0003
5	50000	5	0.0005
10	100000	10	0.001
20	200000	20	0.002
25	250000	25	0.0025
50	500000	50	0.005
100	1E+06	100	0.01
250	2.5E+06	250	0.025
500	5E+06	500	0.05
1000	1E+07	1000	0.1

How to convert Square Metre/Second to Stokes

1 m²/s = 10000 St. To convert any value, multiply it by 10000. For example, 25 m²/s = 250000 St.

Frequently asked questions

How many St are there in one m²/s?: One m²/s is equal to 10000 St.
How do you convert Square Metre/Second to Stokes?: Multiply the value in Square Metre/Second by 10000 to get the result in Stokes.
How much is 25 m²/s in St?: 25 m²/s is equal to 250000 St.
How do you convert Stokes back to Square Metre/Second?: Divide by the same factor: multiply the value in Stokes by 0.0001 to get Square Metre/Second.