Convert stokes to square metre/second

Vice Versa: square metre/second to stokes

Stokes

The stokes (St) is the CGS unit of kinematic viscosity, named after Sir George Gabriel Stokes. One stokes equals one square centimetre per second (1 cm²/s = 10⁻⁴ m²/s). Water at 20°C has a kinematic viscosity of about 0.01 St (1 centistoke).

Square Metre/Second

The square metre per second (m²/s) is the SI unit of kinematic viscosity, defined as dynamic viscosity divided by density. It measures how readily a fluid flows under gravity. Water has a kinematic viscosity of approximately 10⁻⁶ m²/s (1 cSt) at 20°C.

Stokes to Square Metre/Second conversion table

Stokes	Square Metre/Second	Square Metre/Second	Stokes
1	0.0001	1	10000
2	0.0002	2	20000
3	0.0003	3	30000
5	0.0005	5	50000
10	0.001	10	100000
20	0.002	20	200000
25	0.0025	25	250000
50	0.005	50	500000
100	0.01	100	1E+06
250	0.025	250	2.5E+06
500	0.05	500	5E+06
1000	0.1	1000	1E+07

How to convert Stokes to Square Metre/Second

1 St = 0.0001 m²/s. To convert any value, multiply it by 0.0001. For example, 25 St = 0.0025 m²/s.

Frequently asked questions

How many m²/s are there in one St?: One St is equal to 0.0001 m²/s.
How do you convert Stokes to Square Metre/Second?: Multiply the value in Stokes by 0.0001 to get the result in Square Metre/Second.
How much is 25 St in m²/s?: 25 St is equal to 0.0025 m²/s.
How do you convert Square Metre/Second back to Stokes?: Divide by the same factor: multiply the value in Square Metre/Second by 10000 to get Stokes.