Convert stokes to square meter/second

Vice Versa: square meter/second to stokes

Stokes

The stokes (St) is the CGS unit of kinematic viscosity, dem name am after Sir George Gabriel Stokes. One stokes equals one square centimetre per second (1 cm²/s = 10⁻⁴ m²/s). Water at 20°C has a kinematic viscosity of about 0.01 St (1 centistoke).

Square Meter/Second

The square metre per second (m²/s) is the SI unit of kinematic viscosity, dem define am as dynamic viscosity divided by density. It measures how readily a fluid flows under gravity. Water has a kinematic viscosity of approximately 10⁻⁶ m²/s (1 cSt) at 20°C.

Stokes to Square Meter/Second conversion table

Stokes	Square Meter/Second	Square Meter/Second	Stokes
1	0.0001	1	10000
2	0.0002	2	20000
3	0.0003	3	30000
5	0.0005	5	50000
10	0.001	10	100000
20	0.002	20	200000
25	0.0025	25	250000
50	0.005	50	500000
100	0.01	100	1E+06
250	0.025	250	2.5E+06
500	0.05	500	5E+06
1000	0.1	1000	1E+07

How to convert Stokes to Square Meter/Second

1 St = 0.0001 m²/s. To convert any value, multiply it by 0.0001. For example, 25 St = 0.0025 m²/s.

Frequently asked questions

How many m²/s are there in one St?: One St is equal to 0.0001 m²/s.
How do you convert Stokes to Square Meter/Second?: Multiply the value in Stokes by 0.0001 to get the result in Square Meter/Second.
How much is 25 St in m²/s?: 25 St is equal to 0.0025 m²/s.
How do you convert Square Meter/Second back to Stokes?: Divide by the same factor: multiply the value in Square Meter/Second by 10000 to get Stokes.